HPLC Guard Columns and Cartridges
YMC America, Inc Cell-C guard 3um 10x4mm
YMC s CHIRAL ART series features polysaccharide-derived chiral stationary phases (CSPs) based on amylose and cellulose tris-carbamate derivatives available in both coated and immobilized formats These columns provide exceptional stereoselectivity durability and solvent versatility supporting normal-phase reversed-phase and supercritical fluid chromatography (SFC) modes
YMC America, Inc ProC4 guard 120A 5um 10x3mm
YMC-Pack C4 is ideal for analyzing mixtures with a wide range of component polarity This is due to the C4 bonded phase exhibiting shorter analysis time while still maintaining high resolution when compared to longer-chain bonded chemistries YMC-Pack C4 (Butyl) columns are available with three pore sizes to accommodate optimum separations of virtually any molecular-weight compound The 120 phase is used extensively with non-polar peptides which are too strongly retained on C8 and C18 The 200 and 300 phase columns effectively resolve many classes of proteins and biopolymers The wide pore butyl chemistry allows minimal distortion of tertiary conformation for large biomolecules and results in samples that are pure concentrated and high in biological activity
YMC America, Inc ODS-AL guard 120A 5um 20x3mm
YMC-Pack ODS-AL is a non-endcapped high carbon load monomeric C18 phase It exhibits different selectivity from conventional ODS columns due to the use of not only hydrophobic interaction but also secondary interactions caused by silanol groups YMC-Pack ODS-AL is intended for use only in those situations where residual silanol activity is beneficial to the separation
YMC America, Inc C4 guard 200A 3um 20x3mm
YMC-Pack C4 is ideal for analyzing mixtures with a wide range of component polarity This is due to the C4 bonded phase exhibiting shorter analysis time while still maintaining high resolution when compared to longer-chain bonded chemistries YMC-Pack C4 (Butyl) columns are available with three pore sizes to accommodate optimum separations of virtually any molecular-weight compound The 120 phase is used extensively with non-polar peptides which are too strongly retained on C8 and C18 The 200 and 300 phase columns effectively resolve many classes of proteins and biopolymers
Sepax Technologies Inc Sepax HPLC Column Proteomix WCX, NP5, Guard cartridge with holder, 2 x 10 mm
Proteomix ion-exchange phases have been innovatively developed for achieving high ion-exchange capacity, a breakthrough technology for non-porous resins. Proteomix packing support is composed of a rigid, spherical, highly cross-linked poly(styrene divinylbenzene) (PS/DVB) non-porous bead with particle size selections of 1.7, 3, 5 and 10 µm. The PS/DVB resin surface is grafted with a highly hydrophilic, neutral polymer thin layer with the thickness in the range of nanometer.
Waters Corp VanGuard Cartridge, Symmetry Shield RP8, 100Å, 5 μm, 2.1 mm × 5 mm
This VanGuard Cartridge extends analytical column lifetime and performance by removing particulate and chemical contamination from the mobile phase. It is compatible with 2.1 mm and 3.0 mm I.D. Symmetry Shield RP8 analytical columns utilizing 5 μm sorbent particles.
- Maintains UPLC, UHPLC, and HPLC separation efficiency.
- Provides cost-effective protection for analytical columns.
- Compatible with 2.1 mm and 3.0 mm I.D. analytical columns.
- Features C8 chemistry with 100Å pore size.
- Utilizes 5 μm spherical silica particles.
- Designed for a pH range of 2 to 8.
- Supports HPLC systems with a maximum pressure of 18000 psi (1240 bar).
Optimize Technologies EXP Trap Cartridge, 4.6mm x 5mm, 3.0µm EXP, Phenyl-Hexyl, 3pk
The Hand-Tight EXP™ Trap Column is rated to 20,000+ psi. This unique design connects directly to any injection valve (with 10-32 threads) or in-line with 1/16” tubing for unparalleled convenience and efficiency. The EXP™ System enables chemists to quickly remove detergents or salts which can affect the ionization process in MS work. This trapping technique can concentrate the sample directly on-line, allowing for increased recovery of precious sample material compared to off-line techniques. Free-Turn™ architecture allows users to change cartridges by hand without breaking fluid connections on the holder inlet/outlet. The EXP™ Trap Column family now offers packed beds available in 2, 5, 10, 15, 20 and 30mm lengths with diameters ranging from 1-4.6mm and bed volumes from 1.6-600µL. Please contact your representative directly if you're interested in a length other than 5mm.
Waters Corp XSelect VanGuard Cartridge, C18, 5 μm, 100 Å, 3.9 mm X 5 mm
XSelect HSS C18 VanGuard Cartridges protect analytical columns by removing particulate contamination. Optimized for 4.6 mm I.D. columns with 5 μm sorbent, they feature HSS (High Strength Silica) for enhanced chromatographic performance, higher polar compound retention, and varied selectivity. These cartridges resist UPLC pressures and are scalable to UPLC separations.
- C18 chemistry, reversed phase separation
- Silica spherical particles
- pH range of 1 to 8
- Maximum pressure of 18000 psi (1240 Bar)
- Endcapped with low silanol activity
- 100 Å pore size
- 3.9 mm inner diameter, 5 mm length
- Packaged as 3 units per package
Waters Corp Waters XSelect Sentry Guard Cartridge, HSS T3, 100 Å, 3.5 μm, 3 mm X 20 mm
This column is a fully endcapped, low-coverage C18 bonded-phase column designed to retain extremely polar compounds by reversed-phase in high aqueous mobile phases.
- Chemistry: C18
- Separation mode: Reversed phase
- Particle substrate: Silica
- pH range: 2 to 8
- Temperature limits: 45°C
- Maximum pressure: 6000 psi (415 bar)
- Endcapped: Yes
- Bonding technology: T3
- Silanol activity: Medium
- Particle shape: Spherical
- Particle size: 3.5 μm
- Pore size: 100 Å
- Format: Sentry guard cartridge
- Surface area: 230
- System: HPLC
- Particle technology: HSS
- USP classification: L1
- Inner diameter: 3 mm
- Length: 20 mm
- Carbon load: 11 %
- Units per package: 2 pk
Sepax Technologies Inc Sepax HPLC Column PolyRP-NP10, 2 x 10 mm
GP-C8 phase is synthesized with monomeric and fully endcapped chemistry. The uniform octyl stationary phase allows high efficiency with lower hydrophobicity compared to ODS phase. GP-C8 phase is suitable for separating compounds with a wide range of hydrophobicity. It is highly recommended for separating the compounds which are too strongly retained on C18 phases.
Mac-Mod Avantor ACE C18-PFP, 100 Å, 3 µm, 1.0 x 10 mm Guard Cartridges (5/pk)
Avantor ACE Excel UHPLC and HPLC columns are manufactured with 100 Å Ultra-Inert Base Deactivated Silica specifically designed for your HPLC method development needs - Note SuperC18 is 95 Å Avantor ACE HPLC columns are available in a wide range of bonded phases (i.e. C18, C18-AR, C18-PFP, C18-Amide, CN-ES, SuperC18, NH2, C8, C4, Phenyl, AQ, CN and Sil). Avantor ACE Excel UHPLC and HPLC columns are avaialble in 1.7, 2, 3, and 5 µm particle sizes in all analytical column sizes. All Avantor ACE Excel columns are known for their excellent peak shape and batch to batch reproducibility. Columns are packed in 1000 bar UHPLC hardware. Note: Avantor ACE Excel UHPLC guard columns are available for all 1.7 and 2 µm particle sizes across all 2.1 mm - 4.6 mm column ID - Note: H0011 connects directly to the analytical column - Guard column cartridges are available in 3-packs. For 3 and 5 µm Excel columns use same guard systems used for Avantor ACE HPLC analytical columns.
Mac-Mod Evosphere C18/AR, 100 Å, 5um, 10 x 10 mm Monodisperse Fully Porous Guard Cartridge
Evosphere UHPLC and HPLC columns are 100 A Monodispersed Fully Porous Silica-based columns designed to combine the benefits of Fully Porous and Core-Shell particle technology into an improved particle design and morphology that brings cutting-edge loading capacity to ultra-high-resolution particle columns. The Monodispersed Particles provide similar efficiency to Core-Shell products when comparing them directly via particle size matching and significantly increase loadability which allows ultra-high resolution analytical separations to scale to preparative separations for isolation work if needed. The bonded phase chemistries are exciting as well to maximize selectivity with novel C12 bonded phase, 2 multi-modal C18/AR, and C18/PFP bonded phases, an extended and stabilized phenyl funtionality in the Diphenyl bonded phase, a polar endcapped AQUA phase, a Phenyl-Hexyl phase, a propyl PFP phase and the RP18-Amide bonded phases which is great for doing bases at low pH.
Optimize Technologies EXP2 Replacement Stems, 0.68µL, 2.7µm HALO, C18, 3pk
Specialized features, patented technology, precision engineering and state-of-the-art manufacturing make the new EXP2 Stem Trap an unbeatable choice for ultra high-pressure trapping applications. Its slim architecture allows it to easily fit into crowded instrument compartments or to connect directly to tightly-spaced injection ports. When tightened by hand, the EXP2 Stem Trap seals to 8,700+ psi. Additionally, the product can be wrench tightened to 20,000+ psi (1,400+ bar). The unique packed floating stem installs directly into any 10-32 port and automatically adjusts to provide a perfect ZDV connection. The new EXP2 design incorporates an integral ferrule into the front-end of the holder so there is no separate ferrule to lose! The replacement stems are also low volume/ low-dispersion, intended for many repeat uses and is available with various bed volume and custom packing options. This product is recommended for nano flow applications. For use with EXP™2 Stem Holder Only
Waters Corp Waters Atlantis Sentry Guard Cartridge, 100Å, 5 μm, 4.6 mm × 20 mm
This Sentry Guard Cartridge protects analytical columns by removing chemical impurities and suspended solids. Utilizing universal, silica-based, reversed-phase C18 chemistry, it ensures balanced retention for polar and hydrophobic molecules. Designed for direct attachment, it minimizes extra column volumes and reduces leaks. Manufactured in a cGMP, ISO 9001 certified plant, each cartridge is tested for performance.
- Protects compatible analytical columns
- Universal, silica-based, reversed-phase C18 chemistry
- Provides balanced retention for polar and hydrophobic molecules
- Removes chemical impurities and suspended solids
- Single unit design for direct attachment to the analytical column
- Minimizes extra column volumes and reduces leaking
- Manufactured in a cGMP, ISO 9001 certified plant
- Each batch chromatographically tested and certified for use